Tools & Accessories > Power Tools

The air sandblaster is very suitable for use in cars, trucks, machinery, stainless steel, brick, glass etch and so on wear-resistant wheels and handles make this device easy to move, occupies a small area, adapts to all kinds of ground. In addition, 250 cm long hose and cutoff nozzle will be more convenient to use.The main body material is steel, operating pressure is 60-125 psi, has 10 gallon capacity, dust and sand separation.

Key Features:

• Portable
• Heavy duty
• Steel Construction
• Strong flexibility
• Multipurpose
• Large capacity
• Dust sand separation
• Long hose

Material: Steel

Working Pressure: 60-125PSI

Tank Capacity: 10 gal

Weight: 17kg

Dimension: 34cm x 44cm x 89cm

Hose length: 250cm

Colour: Red

• 1 x Air Sandblaster Set
• 1 x Manual

Widely used in farming (lawn and garden), tour vehicles, special vehicle, ship, beverage, vehicle cleaning, carpet cleaning, ground cleaning. (only used for cleaning water, do not use for pesticide water or sewage) Diaphragm pump combines the advantages of the self-priming pump and chemical pump Using a variety of imported corrosion-resistant materials, self-priming, thermal protection, smooth operation, long-time continuous idling, long-time continuous load operation Automatically on or off: When the water outlet is closed, it will automatically cut off the power, the motor stops. After the water outlet is opened, it will automatically power on, the motor runs. Rubber bracket can absorb vibration from the pump when working Intermittent service: different working pressures lead to different continuous working times Installed in a dry, well-ventilated location and can’t work in water Water pump with a pressure switch will be automatically cut off when the pressure of water outlet is big enough.

• Volts : 12V DC,220VAC
• Rated power: 70 W
• Pressure : 0.9 MPA (MAX 130 PSI)
• Flow capacity: 6 L/MIN (6.0 Liters per minute)
• Product Size: See photos
• Product Weight : 0.64 kgs/1.41lbs

• 1x Water Pump

• 1x TradeRight Chainsaw Sharpener Grinding Wheel Only

• 1x TradeRight Chainsaw Sharpener Grinding Wheel Only

• 1x TradeRight Chainsaw Sharpener Grinding Wheel Only

The Clamp strap  is suitable for clamping large or irregular surfaces that can't use the  traditional bar and pipe clamps.Holding it securely in place whilst enabling even pressure on all sides whilst the bonding sets;The plastic frame has two quick-adjust side levers for locking and releasing of belt tension and its 4 plastic corner braces are designed to provide a square and  tight corner ; Removeable plastic corners to clamp other shapes;Fine thread micro-adjustment and spindle for  tuning band tension;

Key Features:

• Tightening mechanism
• Four secure jaws
• Even clamping pressure
• High strength nylon webbing
• Anti-slip handle
• Ideal for corner and irregular pieces projects

Clamp material: Plastic
Webbing material: Nylon
Strap dimension: 6m x 2.5cm (L x W)
Colour: Black

• 2 x Strap Clamp

Our Angle Clamp is an ideal solution for fixing picture frames, small wood boxes, fish tanks, and woodworking reinforcement. A professional tool for professional people. A heavy-duty zinc alloy construction with steel screws for added durability. Designed to be tough, anti-rust, and for long term use. For convenient use, adjustable jaws allow easy clamping for different sizes and different width. Stronghold connection for extra hardness and endurance. Fix and forget, does not fall off easily. Stays with you longer. Can be used for 45-degree sawing with 90 degrees right angle clamp. A smart tool for smart work, simple operation and labour-saving.

Key Features:

• 90° /45° Angle clamp
• Rugged connection
• Adjustable jaws
• 0mm - 75mm Clamping range
• High hardness
• Anti-rust
• Heavy duty fixing
• Lightweight
• Simple operation

Material: Zinc alloy

Weight: 2.4kg

Clamping range: 0mm - 75mm

Dimension:  24 cm x 10cm x2.5cm

Colour: Red

• 4 PCS x Angle Clamp

DC IGBT Inverter welder, a professional welding device designed to meet the requirements of tradesmen. Precisely calibrated product to provide effective output. Our DC welder is tested rigorously to eliminate any possibilities of unknown error. Highly stable in terms of its operation and usability. Advanced cooling systems with shutter and fan controls enable a long working life. It provides smooth and impeccable welding for flawless results.

High-quality construction is designed with durable and sturdy material for long-term use. Helps you complete your task efficiently with less trouble. The built-in amperage display provides a simple yet effective interface, extremely easy to operate and manage. Equipped with calibrated dials to easily vary the current between 20-180amps. To make the operations safer it is equipped with triple protection system namely over current and voltage protection, the system automatically cuts off the power supply if an unusual surge in current or voltage occurs, excess use can sometimes overheat the internal components to avoid such a scenario our product is equipped with overheat detection sensors which disconnect the input power supply if components start to overheat.

With our product, you do not need to carry bulky power cords with you every time. State-of-the-art IGBT DC inverter technology enables portable and convenient use. IGBT DC inverters are compact with greater output efficiency. Built-in DIN sockets for ultimate compatibility. Very easy to carry around with its portable and compact handle.

Suitable for welding metals such as carbon steel, iron, stainless steel, copper, nickel, titanium, and many more. Accessories included with the product are 1.5m power cord, 1.6m electrode, 1.4m earthed clamp, and face shield. Helping you perform your work efficiently.

Designed with perfection, aimed for professionals.  

Key Features:

• Compact design
• Triple protection
• Adjustable output current range
• High ruggedness and durability
• IGBT inverter technology
• Industry standard DIN sockets
• Current stabilisation
• Advanced cooling system
• Stable and smooth arc
• Works with variety rod sizes
• Ultra-portable handle
• SAA, CE certified

• Power Voltage：Single phase 240V, 50Hz
• Power Plug：10A AU Standard
• Output Current Range：20amp - 180 amp 
• Power Factor：COS 0.73
• Duty Cycle：60%
• Shell Protection Grade：IP21S 
• Power Cord Length：1.5m,Electrode Cable Length：1.6m,Earth Clamp Cable Length：1.4m
• Welding Electrodes：2.5mm - 4.0mm 
• Generator Recommended：6.8kVA 
• Weight：5.32kg
• Dimension：16cm x 38cm x 25cm (L x W x H)

• 1x Welder
• 1x Hand-held mask
• 1x Hammer/Brush
• 1x Electrode holder
• 1x Earth clamp
• 1x Operating manual

DC IGBT Inverter welder, a professional welding device designed to meet the requirements of tradesmen. Precisely calibrated product to provide effective output. Our DC welder is tested rigorously to eliminate any possibilities of unknown error. Highly stable in terms of its operation and usability. Advanced cooling systems with shutter and fan controls enable a long working life. It provides smooth and impeccable welding for flawless results.

High-quality construction is designed with durable and sturdy material for long-term use. Helps you complete your task efficiently with less trouble. The built-in amperage display provides a simple yet effective interface, extremely easy to operate and manage. Equipped with calibrated dials to easily vary the current between 20-160amps. To make the operations safer it is equipped with triple protection system namely over current and voltage protection, the system automatically cuts off the power supply if an unusual surge in current or voltage occurs, excess use can sometimes overheat the internal components to avoid such a scenario our product is equipped with overheat detection sensors which disconnect the input power supply if components start to overheat.

With our product, you do not need to carry bulky power cords with you every time. State-of-the-art IGBT DC inverter technology enables portable and convenient use. IGBT DC inverters are compact with greater output efficiency. Built-in DIN sockets for ultimate compatibility. Very easy to carry around with its portable and compact handle.

Suitable for welding metals such as carbon steel, iron, stainless steel, copper, nickel, titanium, and many more. Accessories included with the product are 1.5m power cord, 1.6m electrode, 1.4m earthed clamp, and face shield. Helping you perform your work efficiently.

Designed with perfection, aimed for professionals.  

Key Features:

• Compact design
• Triple protection
• Adjustable output current range
• High ruggedness and durability
• IGBT inverter technology
• Industry standard DIN sockets
• Current stabilisation
• Advanced cooling system
• Stable and smooth arc
• Works with variety rod sizes
• Ultra-portable handle
• SAA, CE certified

• Power Voltage：Single phase 240V, 50Hz
• Power Plug：10A AU Standard
• Output Current Range：20amp - 160 amp 
• Power Factor：COS 0.73
• Duty Cycle：60%
• Shell Protection Grade：IP21S 
• Power Cord Length：1.5m,Electrode Cable Length：1.6m,Earth Clamp Cable Length：1.4m
• Welding Electrodes：2.5mm - 4.0mm 
• Generator Recommended：6.8kVA 
• Weight：4.32kg
• Dimension：16cm x 38cm x 25cm (L x W x H)

• 1x Welder
• 1x Hand-held mask
• 1x Hammer/Brush
• 1x Electrode holder
• 1x Earth clamp
• 1x Operating manual

Traderight Chainsaw Sharpener provides an accurate sharpening of each chain saw tooth! Every tooth will be the same length and correct angle for precise use. Powered by high torque alloy moto r of 220W, 50Hz which peaks at 320W, grinds almost any chain type and size! Features a large transparent protective cover, operation handle, pre-drilled holes for bench mounting, an adjustable chain stop, grinding wheels, max cutting length of 250mm as well as light - rigid CAD designed construction. Optional grinding disc can be purchase separately.

• High performance motor ensures no burn, hot spot or soften your chainsaw
• Large transparent protective cover
• Industry standard 10mm arbor - get consumables anywhere
• Sharpen all pitches from 0.325, 404, 3/8, 3/16
• Rigid chain vice for accurate cuts and extended chain life
• Spring-loaded grind head that can be adjusted up to 30°
• Standard SAA approved

• Power: 220W
• Rated: Voltage 250V
• Rated Frequency: 50 Hz
• Wheel Max RPM 7500r/min
• Wheel Circulation Speed 42m/s
• Wheel Diameter 100mm
• Vibrations 2753m*s-2 Wheel
• Dimensions 100x100x3.2mm
• Cord Length 1m
• Grinding angle 30°to left and right

Chainsaw Sharpener

1x TradeRight Chainsaw Sharpener

2x Grinding Disc

1x Instruction Manual

Grinding Disc 100mm(Dia.)

1x Grinding Disc

Traderight Chainsaw Sharpener provides an accurate sharpening of each chain saw tooth! Every tooth will be the same length and correct angle for precise use. Powered by high torque alloy moto r of 220W, 50Hz which peaks at 320W, grinds almost any chain type and size! Features a large transparent protective cover, operation handle, pre-drilled holes for bench mounting, an adjustable chain stop, grinding wheels, max cutting length of 250mm as well as light - rigid CAD designed construction. Optional grinding disc can be purchase separately.

• High performance motor ensures no burn, hot spot or soften your chainsaw
• Large transparent protective cover
• Industry standard 10mm arbor - get consumables anywhere
• Sharpen all pitches from 0.325, 404, 3/8, 3/16
• Rigid chain vice for accurate cuts and extended chain life
• Spring-loaded grind head that can be adjusted up to 30°
• Standard SAA approved

• 1x Traderight Chainsaw Grinding Disc

Chainsaw Sharpener

1x TradeRight Chainsaw Sharpener

2x Grinding Disc

1x Instruction Manual

Grinding Disc 100mm(Dia.)

1x Grinding Disc

This is a precision chain saw grinder giving accurate sharpening of each chain saw tooth! Which means every tooth will be the same length and correct angle. 

Our grinder makes chain saw sharpening so easily, and gives your chain saw a professional result.

Powered by a 220W, 50Hz motor which peaks at 320W, grinds almost any chain type and size! 

The grinder also features a large transparent protective cover, operation handle, pre-drilled holes for bench mounting, an adjustable chain stop, grinding wheels, max cutting length of 250mm as well as Light - rigid CAD designed construction and a high torque alloy motor.

• 100% Brand New and High Quality
• Constant Commercial Motor ensures you never burn, hot spot or soften your chain
• Large Transparent Protective Cover
• Industry Standard 10mm Arbor - get consumables anywhere
• Sharpen all pitches from 0.325, 404, 3/8, 3/16
• Rigid chain vice for accurate cuts and extended chain life
• Spring-loaded Grind Head that can be Adjusted up to 30°
• Standard SAA approved
• 1 Year Warranty

• Brand : TradeRight
• Operating Voltage : 220-240V
• Rated Power : 220W
• Max Power : 320W
• Max Motor RPM : 7,500RPM
• Wheel Diameter: 100mm
• Wheel Circulation Speed: 42m/s
• Working angle : 30 Degrees Left to Right

• 1x TradeRight Chainsaw Sharpener
• 1x Allen key
• 1x Grinding Disc
• 1x User Manual

Our handy Profile Gauge conforms to shape and holds pattern. Suitable for measuring various shapes such as cylinders, irregular objects, odd shaped corners etc. Easy to use only press the pins against the object to match the contour, then trace the shape you need.

Key Features:

• Suitable for measuring various irregular shapes
• High precision calibration
• Inch and centimeter marking range
• Long-lasting ABS material
• Accurate measurement
• Easier cutting

Material: ABS

Measurement unit: Inch and centimeter

Dimension: 12cmx10.5cm

Colour: Green

• 1 x Profile Gauge

Our handy Profile Gauge conforms to shape and holds pattern. Suitable for measuring various shapes such as cylinders, irregular objects, odd shaped corners etc. Easy to use only press the pins against the object to match the contour, then trace the shape you need.

Key Features:

• Suitable for measuring various irregular shapes
• High precision calibration
• Inch and centimeter marking range
• Long-lasting ABS material
• Accurate measurement
• Easier cutting

Material: ABS

Measurement unit: Inch and centimeter

Dimension: 25cm x 10.5cm

Colour: Green

• 1 x Profile Gauge

• 2x Traderight Electric Wood Planer Blades

• 2x Traderight Electric Wood Planer Blades

• 2x Traderight Electric Wood Planer Blades